Unistruct Solar Stand C Channel Roll Forming Machine
Production Line Component
Equipment part list of automatic U type auto punching/roll forming machine
| No. | Name | Type | Quant. | Power of motor (KW) |
| 1 | Passive Decoiler | MT-300 | 1 set | |
| 2 | Leveler | HS-300 | 1 set | 3 |
| 3 | Servo-feeder | NCF-300 | 1 set | 2.2 |
| 4 | JF21-80 Punching machine | YANGLI GROUP | 1 set | 7.5 |
| 5 | Punching mould | | 1 set | |
| 6 | Roll forming machine | Gantry gearbox | 1 set | 18.5X2 |
| 7 | Flying Hydraulic cutting | | 1 set | 5.5 |
| 8 | Run-out table | SL-300X4000 | 1 set | |
| 9 | Electric control system | | 1 set | |
Main technical parameters
1. Machine Technical parameters
Width of material sheet:≤200 mm
Thickness of material sheet: 0,95 mm up to 1,55 mm
Material of sheet:Galvanized Steel,etc
Line production speed:15-20m/min(including punching/forming/cutting)
Length of the work piece:3000mm-6000mm.
Total Power: 48.2 KW.
2. Machine General Working Condition
Area of production line: length45m x width 3.5m x height 5m
Feeding direction: from left side to right side
Power: 380V, 50Hz, 3 phase
Pneumatic station: pressure 0-0.6MPa.,0.5m3/min.
Hydraulic oil: 46# Hydraulic oil
Gear oil: 18# gear oil
3. Main forming machine
Type:GY160
Forming stations:29stations(roller)
Forming machine:U channel
Forming frame:Dragon-type,gearbox drive
Max. Feeding width:≤300mm
Max. Feeding thickness:1.55mm
Roller axis:φ70 mm,shaft material:#45 quenching treatment
Material of the roller:Cr12,quenching treatment,HRC58-62°Main drive motor:22KW frequency motor drive
4. Unistruct Drawing or Size
Normal Sizes:41X21mm/41X41mm/41X61mm/41X72mm or other sizes required by your actual usage.
BOSJ offer sample design,or you can offer your sizes.We will offer you the suitable technical proposal and machine structure.
5. Main Machine Technical parameter
| ,NO. | Name | unit | parameter | remark |
1 | materials | Type | | Mild steel galvanized sheet | |
| Plate strength | | ≥350 | |
| Plate thickness | mm | 1.5~2.5 | |
| 2 | specification | mm |
See the picture | |
| 3 | speed | m/min | 6~8 | |
| 4 | Material of the roller | | GCr15 Hardening treatment | |
| 5 | drive type | | Gear box | |
| 6 | power | kw | About40 | |
| 7 | Electrical control system | | PCL frequency control | |
| 8 | Size(lengthXwidthXheight) | m | 35X4X3.9 | |
Product Tags:
|
|
15-30m/min C Channel Roll Forming Machine , GCr12 Roller Purlin Forming Machine Images
|
